Your GE washer makes doing laundry a lot easier. It saves you time and money from having to go to a laundromat each week, saving loonies and quarters is tougher than you think, and cleans your clothing faster and more efficiently.
Every now and again you might experience some issues with your washer as it begins to age, but instead of replacing it, first consider getting it repaired. It is a lot more cost-effective and means you get to enjoy your washer longer. If your looking to get your GE washer repaired in Ottawa, give Repair Care a call for quick and efficient service.
* Washer won’t spin
* Washer won’t drain
* Washer is leaking water
* Washer isn’t starting
* Washer door or lid won’t lock
* Washer stops mid cycle
* Washer makes loud noises
Sometimes the biggest problems have the smallest solutions. Before calling a professional, read these tips to see if your solution can be done easily.
If your washer won’t spin during cycles, you might have put too much clothing into the unit and its too heavy to spin. Try removing clothing and try again. If it’s still not spinning check the door or the lid to make sure its locking. Most newer washers won’t turn on it the lid or door isn’t locked in place.
If you notice that the water in your washer isn’t draining, check to see if there is a small object or clothing article that is blocking or got caught in the drain. Check the drain pipe, and if some is there remove it, or if there isn’t something there call a professional to take a look.
If your washer is not starting, double check to see if it is plugged in or not. There is nothing more embarrassing than calling a professional and then finding out the unit wasn’t turned on. If it is, try pressing the buttons on the control panel. If they aren’t working the control panel might need to be replaced and you will need to call a professional to install a new one.
If you notice your washer is making loud noises, you might have left some small objects in your pockets. After the cycle, check to see if anything fell out and remove them. If you don’t see anything, there might be a problem with the bearings, in which you will probably need to call a professional to take a look.