Frost formation in your Samsung Fridge could be due to many reasons, It could be at user fault or parts which control and governs the auto defrosting system in a fridge like Defrost Heater, Defrost Thermostat and the Control Board. Nevertheless we must get the ice defrost from our fridge.

Turn the Samsung Fridge off

It is mandatory to turn your Samsung Fridge before you start the defrosting process. If you try to keep your Fridge running while you are on defrosting task, will impeded your defrosting work and also its a huge risk for electric shock. For instance, if you leave your fridge on and you are placing bowls of hot water on every shelves to defrost the ice. You might end up with broken fridge all together. While the evaporator coil is trying to release cool air, the steam from your hot water bowl would be trapped on the coil. As a result, frost forms on the coil.

Remove all the items from Fridge

Get a spacious cooler with ice cube ready to store all the foods items from yo ur fridge. Defrosting manually take times. This is perfect time for long overdue fridge cleaning for good. Empty all foods and take out all the shelves and crisper.

Keep the door open.

The primary method of defrosting your Samsung Fridge can by done by keeping its door open. As the fridge has been turned off, opening the door will allow warm air to go into fridge. It will help melts the ice stuck on the walls.

Below are other things you can do to expedite the defrost process

• Using bowls of hot water.
• Scraping
• Use a blow dryer
• Use a fan

Hot water bowl is most effective way to defrost the ice quickly. Place hot water bowl on the shelves in the fridge. The steam would heat up the ice on the walls.  Try to change the water every now and then, just so defrosting is effective with newer hot water.

We can also scrapper to scrap ice off the walls. But be very careful if you are using sharp objects. It might puncture the walls or the fridge freon gas line.

Use a hair dryer to defrost your fridge is safe and effective. The portable and hot air from the dryer is very convenient to use and effective.

We can also use a Fan to circulating the warm air into the fridge. This will help defrost the ice buildup much faster.

Once defrost has been done completely. Get a Appliance Repair technician to look at the fridge. Timely repair can be safe and prolong the lifespan of your Samsung Fridge.

• When an Icemaker stops working or produces only tiny cubes, it’s usually because the water supply is partially or completely blocked. To find and fix the blockage, check out the three common trouble spots.
• Remove the screws that hold the icemaker in place. Unplug the wiring harness and remove the icemaker to expose the water inlet tube.
• First, check the Water Inlet tube for ice. The tube that supplies water to your Ice Maker can get clogged with ice when the water pressure is low. The trickling water freezes and plugs the tube before it reaches the icemaker.
• Second, unblock the saddle valve. Most Ice Makers are connected to the household water supply by a “saddle” valve. One problem with saddle valves is that the needle hole in the pipe can clog. Fortunately, that blockage is easy to clear once you locate the saddle valve. If you have an unfinished basement, you’ll probably find a tube beneath the fridge that leads to the valve. Otherwise, look under your kitchen sink.
• Third, replace the Water Inlet valve. At the back of your fridge, there’s a small electric “inlet valve” that turns the water supply to the icemaker on and off. Before you replace the valve, make sure water is flowing to it: Turn off the water at the saddle valve and disconnect the supply tube from the inlet valve. Hold the tube over a bucket and have a helper turn on the saddle valve. If water flows out of the tube, the water supply is fine and chances are the inlet valve is bad. Contact Repaircare to help source the right part for your repair. When the job is done, turn the water back on and check for leaks before you push the fridge back into place.

Changing Maytag Fridge Water Filter is a very quick and crucial process. It should be change every six months.

Water Filter change can be done in 3 simple steps.

1. Find it – Usually its in the upper right top corner or the left side of the grille base.
2.  Identify the Filter – Maytag Fridge Water Filter has single digit number printed on every type of Filter. Each type slightly different than the last type.
3. Replace the Filter.

For today’s tutorial – How to replace Fridge Water Filter # 1 ?

• Locate the Water Filter Cover in the upper right corner inside your Fridge or in the base Grille.
• Lift the Filter door up and pull the Filter out and discard it
• Remove the protective covering from the O-Ring of new Water Filter
•  Please make sure O-Ring is intact after the cover has been removed.
•  Insert the new Filter into the Filter slot, make sure not to force the Filter in. Gently slide in easily and rotate to ensure the notches are properly aligned.
• Once Filter is replaced, run water through the line to flush it thoroughly through the new Filter.

There are various type of Water Filter, Ensure one must verifies the Filter Type for a smooth installation process.

Should you like our experience technician arrange the right Water Filter and install it for you.

Contact Repaircare, The most reputed Appliance Repair Company in Toronto and surrounding area.